2Sculpt

Abrasives

Brazed Diamond Wheels

These are super grinders are priced great and are in a slight cup or flat shape. Stone just flies off, even on harder marbles. They are rated to work on electric or air angle grinders. Since these are brazed diamond wheels they last a long time. Maximize their use by letting them cool for a few seconds frequently and do not press down too hard: it's not necessary!

Diamond Grinding

Diameter Description Price
 4.5” SEC 16 grit: Vacuum brazed, steel brass flange (5/8”/11), full diamond coverage: most aggressive $ 75.
4.5" SEC 20, 30 or 50 grit, full diamond coverage with 5/8"-11 flange $ 45.
    - available in 30 grit for $ 75.
     
5”  Sword Disk, (very thick, super aggressive) flange (5/8”/11) $ 99.
    - available in 16, 20 and 40 grits  
4.5”   Black Cat for flat work, built-in flange (5/8”,11) $ 99.
5”  Black Cat for flat work, built-in flange (5/8”,11) $ 99.
   

Please call or email so we can help select the correct tools for your carving needs.

Silicon Carbide Green “Stones”

These are green silicon carbide abrasives (the best) mounted to a ¼” shaft. They are all an aggressive 24 grit. They work in a standard drill or electric and air die grinders (rated at 20,000 rpm except the 2”X2” is rated at 12,000). These can be easily shaped to round or other needed contours by holding them to concrete or granite. These are a very economical way to remove lots of material.

  Size Description Price*
Green stones 1/2"d Ball or Cylinder $ 3.50
3/4"d Small tree $ 4
1.25" d   Gumdrop, medium sized (round or angled tip) $ 6. 
2"dx1"    Cylindrical $ 9. 
3/4"d x 2" Bullet $ 11
2.75" x 1" Elongated taper $ 14
2”dx2” Cylindrical $ 14.
2"dx1" Wheel $ 12

Vacuum Brazed Diamond Burrs   Vaccum brazed diamond burrs
Medium size  (40 grit)
(40 grit bullet, football, ball, cylinders and wheels)
$ 39.
Large size
(24 grit: bullet, football, cylinder or wheel)
$ 89.
Electroplated Diamond Sets   Electroplated diamond sets
50 piece, 1/4" Set  $ 35.
20 piece, 1/8" set $ 39. 

Diamond Pads

Diamond pads are much, much faster than sandpaper in finishing. They can be used wet or dry. Many sculptors use the first two grits dry so they can see the scratches and then continue using clean water for successive grits. The hand pads are most comfortable and somewhat flexible while the “strips” and really bend (but do not last as long).

Diamond Hand Pads

    Price*  
Complete set—Hand Pad Set, 60 to 1800 grit (7 pads) — This is the highest quality (made in England) $109.
Individual pads  
  60 or 120 grit $ 22.
  220 or 400 grit $ 18.
  Higher grit pads $ 14.

Square Hand Pads (more flexdibility)

   
Individual Pads    
  60 or 120 grit $ 24.
  220 or 400 grit $ 18.
  Higher grits $ 14.
  Optional Hard Hand Pad (for attaching the strips for removing “bumps”) $ 22.  
       
  Copper Diamond Strips –very aggressive initial sanding 40 grit $ 29.  
       
  Diamond strips—Flexible diamond "sandpaper"    
  60 or 120 grit $22  
  220 or 400 grit $18  

Polishing Disks (for slow speed polisher/grinder)

   
  4" Dry Set of 6  (50 to 1500 grit)  $99
  4" Wet Set of 7  (50 to 1800 grit) $99
  Backing Pads, 4"  (rigid to soft foam) $19
9”x11” S.C wet/dry sandpaper, sold by the sheet, 36 to 2,000 grit $ 1.  
       
Silicon carbide sanding disks    
  2" $1  
  3" $1.25  
  4" $.40  
  5" $.50  
Medium rubber backing pads    
  2" $16  
  3" $18  
  -call for individual disks or larger or smaller diameters    

Wavy Edge Sanding System

These pads with their foam risers are VERY flexible.  They allow you to sand around curves getting into tight spots.   Run it on a drill or slow grinder at 2,500 rpm. Wavy edge sanding system
Backing Pad with Riser (2" or 3") $ 20.
2" silicon carbide disks (80, 120 or 220 grit) .40ea.
3" silicon carbide disks (80, 120 or 220 grit) .50ea.

Silicon Carbide Grinding Stones

silcon carbide grinding stoneFor getting a surface smooth try a “broken” green s.c. stone. Water down the stone and create a green slurry to rub the irregularities out.; $ 3. to $ 8. (size determined)

Silicon Carbide Grinding Sticks

Small silicon carbide sticks for detail hand work, 4"X5/16" in course or fine grit $.1.50 ea.

Home | Tools | Stone | Gallery | Workshop | Ordering | ©2011 2Sculpt