/hermes/bosnaweb27a/b1207/ipg.mylesmtn/wp/wp-content/themes/stockholm/page.php

Diamond Blades / Grinders

All blades have flanges for flush cutting.

diamond_blades

Vacuum Brazed

For quick cutting and longevity in alabaster, limestone, marble.

5” Reversible, full face with flange $89
5” V.B. thin, fast cutting blade $89
7” Reversible, full face with flange $139
9” V.B. Super blade with aluminum flange $169
4.5” Convex Blade (for curved lines) $75
3” Blade with hub for tight places $69
3in Blade

3” blade with hub

Sintered for Alabaster, Limestone, Granite

5” Turbo for very fast cutting, with “sideburns” and flange $79
7” Turbo for very fast cutting, with “sideburns” and flange $99
9” Turbo for very fast cutting, with flange $139

Electroplated for Marble

electroplated_blades

5” Full face, side coated with flange $69
9” Full face, side coated with large aluminum flange $149

Diamond Grinding

7” SEC—30 Disk

4” SEC – 25 grit with hub convex disk $55
4.5” SEC—20 grit with hub: convex disk $75
4.5” SEC — 30, or 50 grits, convex disk (5/8”/11) $45
5” SEC – 25 grit with hub convex disk $55
7” SEC—30 grit convex disk (5/8”/11) $125
5” Sword —30 grit flat, thick “killer” for fast removal $99
4”/4.5”/5” Blackcat flat dia. grinding wheel (40 grit). Great for convex or flat surfaces. Can be used flat for removing all high spots. $99

Silicon Carbide Disks

4” Semi-Flex disk

4” Semi-Flex disk

4” Semi-Flex disk—16, 24 or 36 grits $7
Backing pads for semi-flex disks $11
Replacement “nut” for backing pad $5
7″ Semi-Flex (ZEC) disk (no backing req.), 24 grit $12

Trim-Kut Disks

Trim-Kut

These 3″ and 5″ disks are for shaping and finishing surfaces. As they wear, the edge can be refreshed by running it against concrete. It is used on an angle grinder.

3″ or 5# Trim-Kut—36, 60 or 120 grit $3
Reusable adapter (5/8”-11) $3